Type N channel connection

Our slot units »Pfuhler-Schlitzrinnen-System Z«, Type N are equipped with a removable plug-in connection in the form of a socket and spigot. We supply wedge-shaped elastomer slip rings in NBR quality for the seal, which act as compression seals. 

The width of the butt joint should be 5 to 10 mm and the upper area must be filled with a jointing compound with general building approval after the traffic area has been constructed. 

If laying radii, the channels can be laid at an angle so that a joint of 5 mm results on the inside with a joint of 15 mm on the outside. This results in the following maximum effective channel lengths for laying radii (with channel width 50 cm):

RadiusMax. effective length
mm
501.00
1002.00
1503.00
2004.00